Epoch Batteries
Epoch Dual-Output 12V/36V Marine DC-DC Charger, Charge on the Run, 12V/10A + 36V/10A, IP67
Epoch Dual-Output 12V/36V Marine DC-DC Charger, Charge on the Run, 12V/10A + 36V/10A, IP67
- Regular price
- Price: $249.00
- Regular price
- List Price:
- Sale price
- Price: $249.00
- Unit price
- / per
Notify me when this product is available:
Couldn't load pickup availability
PRODUCT DESCRIPTION
- 🚤Charge on the RunFrom your outboard's charging system
- 🔋2 Outputs12V/10A + 36V/10A
- 🧠Auto Start & StopVoltage-sensing
- 💧IP67 Epoxy-FilledOnboard mounting
- 🇺🇸Free ShippingContiguous 48 states
- 📞Real Human SupportWiring questions
Epoch Dual-Output 12V/36V Marine DC-DC Charger: top up your electronics battery and your 36V trolling-motor battery while the engine runs. It draws from a 12V or 24V starter-battery system and charges two separate batteries through independent outputs: 12V at 10A and 36V at 10A. It starts when the engine raises the starter voltage and stops when it drops, so it won't drain your starting battery while you fish.
Specs from Epoch Batteries' product page and manual.
🔍 Will It Work on My Boat?
- Bass boats
- Tournament fishing
- 12V starter systems
- 24V starter systems
- Your starter system is 12V or 24V. A 36V battery can't be used as the input.
- You have a separate 12V electronics or house battery. Don't connect the 12V output back to the starter battery.
- Your outboard's alternator has spare capacity after your boat's other loads. Both outputs together draw a lot from a 12V system.
- It's non-isolated: follow Epoch's wiring diagram exactly, with proper fusing and grounding.
Why This Charger
More Time on the Water
Adds charge to both auxiliary batteries every time you run between spots.
Automatic Operation
On a 12V source it starts above 13.8V and stops below 13.0V; on 24V, above 26.8V and below 25.2V.
Any Battery Type
Each output can be set to LiFePO4, AGM or lead-acid.
BMS Wake-Up
Wakes a compatible lithium battery that's gone into low-voltage protection.
Marine-Tough
Epoxy-filled IP67 enclosure with aluminum cooling and a waterproof fan.
Built-In Protection
Short-circuit, reverse-connection, overcharge and overtemperature protection.
📦 What's in the Box
- 🔌1 × Epoch dual-output DC-DC chargerModel CHG-DC-12V36V
- 🔴Pre-wired leadsInput, 12V output and 36V output, with ring terminals
📋 Specifications
| Input | |
| Source systems | 12V or 24V starter battery (13–30VDC); 36V input not supported |
|---|---|
| 12V source start / stop | Above 13.8V / below 13.0V |
| 24V source start / stop | Above 26.8V / below 25.2V |
| Outputs | |
| Output 1 | 12V / 10A (about 120W) |
| Output 2 | 36V / 10A (about 360W) |
| Battery modes | LiFePO4, lead-acid or AGM, set per output |
| Replacement fuses | 15A per output |
| Isolation | Non-isolated |
| Build & Mounting | |
| Protection rating | IP67, epoxy-filled |
| Working temperature | -4°F to 104°F (-20°C to 40°C) |
| Dimensions | About 9.84 × 5.87 × 2.68 in (250 × 149 × 68 mm) |
| Mounting | 6.5mm holes, M6 screws; more than 30mm clearance |
| Warranty | 2-year limited (Epoch) |
| Model / SKU | CHG-DC-12V36V |
📄 Manuals & Downloads
❓ Common Questions
Will it drain my starting battery?
Does it replace my onboard AC charger?
Can the 36V output charge three 12V batteries in series?
Is it isolated?
Questions? Ask Us First.
Tell us your boat, outboard and batteries, and we'll confirm the right setup before you order.
📞 Call 833-664-7433📧 Email Us
