Victron Energy

Victron Energy Phoenix Smart IP43 Charger 12/30 (3), 12V 30A 3-Bank Battery Charger, 120-240V, Bluetooth, Lithium Ready, PSC123053095

Victron Energy Phoenix Smart IP43 Charger 12/30 (3), 12V 30A 3-Bank Battery Charger, 120-240V, Bluetooth, Lithium Ready, PSC123053095

πŸ”‹ 12V 30A Smart Charger|πŸ”€ 3 Isolated Outputs|πŸ“± Bluetooth & VE.Direct|πŸ›‘οΈ 5-Year Victron Warranty
Price: $397.80
List Price: $0.00
Price: $397.80
View Cart
In Stock – Ready to Ship
Free Shipping, Lower 48
Manufacturer Warranty
Call Us 833-664-7433
  • πŸ‡ΊπŸ‡ΈFree ShippingContiguous 48 states
  • πŸ›‘οΈ5-Year WarrantyVictron limited warranty
  • πŸ“±Bluetooth Built InVictronConnect app
  • πŸ”‹Lithium ReadyLiFePO4 preset
  • πŸ”€3 Isolated OutputsCharge 3 battery banks
  • πŸ“žReal Human SupportSystem sizing & setup help

Victron Energy Phoenix Smart IP43 Charger 12/30 (3) 120-240V (PSC123053095): a 12V 30A smart battery charger with 3 isolated outputs, built-in Bluetooth and a VE.Direct port. Charge lead-acid, AGM, gel or LiFePO4 batteries from any 120V or 240V outlet with up to 30 A of adaptive charging. Three isolated outputs each deliver full current to separate battery banks, sharing 30 A in total. Built-in Bluetooth lets you set it up and watch charging in the VictronConnect app, and VE.Smart Networking can use readings from a SmartShunt or Smart Battery Sense for more accurate charging. With no cooling fan it runs silently, and it's backed by Victron's 5-year limited warranty.

30 ACharge current
12VBattery voltage
3Isolated outputs
93%Efficiency at 120V

Ratings from Victron's datasheet and manual. Full output up to 40Β°C (104Β°F) ambient.

⚑ Is It Right for Your System?

Built for 12V battery banks charged from standard 120V or 240V shore, generator or grid power. Common uses:

  • Boats & sailboats
  • RVs & campers
  • Golf carts & utility vehicles
  • Off-grid & backup battery banks
  • Workshops & fleet vehicles
πŸ“ Quick check before you order:
  • Your batteries are 12V. Victron recommends 60–300 Ah for lithium, or at least 120 Ah for lead-acid.
  • You have up to three battery banks of the same type. All three outputs share one charge profile and 30 A in total.
  • You'll plug into a 120V or 240V outlet. The AC cord is sold separately: Victron's NEMA 5-15P cord (ADA010100400) for 120V.
  • You'll mount it somewhere sheltered. IP43 means it resists splashing water, but it isn't built for open decks or direct rain.
  • Plan for battery cables (up to 16 mmΒ² / 6 AWG) and fusing sized for your install (not included).
  • Need UL or CSA for an RV or inspection? Victron doesn't list UL or CSA certification for this charger. Call us and we'll suggest an option.
Not sure? Tell us your batteries and how you'll use the charger, and we'll help you pick the right one before you buy.

Why Choose a Victron Phoenix Smart IP43 Charger

πŸ“±

Bluetooth & Instant Readout

Set charge presets, current limits and features in the free VictronConnect app, and see voltage, current and charge state at a glance with Instant Readout.

πŸ”‹

Adaptive 6-Stage Charging

Bulk, absorption, recondition, float, storage and weekly refresh for lead-acid, or a 3-stage profile for lithium, so batteries are charged fully without overcharging.

πŸ”€

3 Isolated Outputs

Charge three separate banks at once. Each output can deliver the full 30 A, but the total of all three never exceeds 30 A.

πŸ”—

VE.Smart Networking

Pair with a SmartShunt, BMV or Smart Battery Sense to use real battery voltage, current and temperature, or sync up to 10 chargers on one bank.

🀫

Silent, Fanless Design

No cooling fan means quiet charging. Low-current mode cuts output to 15 A for smaller batteries or a limited AC supply.

πŸ›‘οΈ

5-Year Victron Warranty

Victron covers it for 5 years from purchase by the original end user, and warranty claims go through us.

πŸŽ₯ VictronConnect Videos from Victron

VictronConnect & VRM app features, including Instant Readout

Did you know: use a Victron smart charger as a power supply

πŸ”‹ Charge Voltages

Preset Absorption / Float / Storage
Normal (lead-acid) 14.4 V / 13.8 V / 13.2 V
High (lead-acid) 14.7 V / 13.8 V / 13.2 V
Li-ion (LiFePO4) 14.2 V / no float / 13.5 V
Recondition (optional, lead-acid) 16.2 V Normal or 16.5 V High, current limited to 8%, up to 1 hour

Victron's default presets. Every voltage can be adjusted in the VictronConnect app, and lead-acid presets use temperature compensation.

πŸ“¦ What's Included & What You'll Need

  • Victron Energy Phoenix Smart IP43 Charger 12/30 (3) 120-240VVictron Phoenix Smart IP43 Charger 12/30 (3) 120-240VPart number PSC123053095
  • AC Cord Retainer ClipIncluded, per Victron's datasheet
  • NEMA 5-15P AC CordNot included. Victron ADA010100400 for 120V outlets (or ADA010100500 NEMA 6-15P for 240V)
  • Battery Cables & FusingNot included. Terminals take up to 16 mmΒ² (6 AWG) cable
Plan to add: The charger needs an IEC C13 AC cord, which Victron sells separately. For battery temperature sensing, add a Smart Battery Sense or SmartShunt. Ask us and we'll put together everything your install needs.

πŸ” Compare Phoenix Smart IP43 Chargers

Every Phoenix Smart IP43 120-240V charger we carry, side by side. Ratings are Victron's.

Model Part # Battery Charge current Outputs Battery bank* Efficiency (120V)
Phoenix Smart IP43 Charger 12/30 (1+1) PSC123051095 12V 30 A Main + 4 A starter 60–300 Ah 93%
Phoenix Smart IP43 Charger 12/30 (3) (this model) PSC123053095 12V 30 A 3 full outputs (shared) 60–300 Ah 93%
Phoenix Smart IP43 Charger 12/50 (1+1) PSC125051095 12V 50 A Main + 4 A starter 100–500 Ah 92%
Phoenix Smart IP43 Charger 12/50 (3) PSC125053095 12V 50 A 3 full outputs (shared) 100–500 Ah 92%
Phoenix Smart IP43 Charger 24/16 (1+1) PSC241651095 24V 16 A Main + 4 A starter 32–160 Ah 94%
Phoenix Smart IP43 Charger 24/25 (1+1) PSC242551095 24V 25 A Main + 4 A starter 50–250 Ah 94%
Phoenix Smart IP43 Charger 24/25 (3) PSC242553095 24V 25 A 3 full outputs (shared) 50–250 Ah 94%

*Lithium minimum to maximum per Victron's manual; lead-acid banks need about twice the lithium minimum. Need help choosing? Call 833-664-7433.

🧰 Control & Features

⚑

Power Supply Mode

Use it as a 12V DC power supply with no battery connected, for testing or running DC loads.

πŸ””

Programmable Relay

SPDT relay rated 5 A up to 250 VAC or 28 VDC, for alarms or remote signalling.

🎚️

Remote On/Off

A 2-pole remote on/off terminal lets you switch it with a remote switch or a battery BMS.

πŸ–₯️

VE.Direct & GX

Connect the VE.Direct port to a Cerbo GX for remote monitoring on Victron's VRM portal.

πŸ›‘οΈ 5-Year Victron Limited Warranty

Years 1–5Victron limited warranty from the original end user's purchase date (max 66 months from Victron's invoice date)
Up to Year 10Optional extension to 10 years, sold through Victron's direct customers. Ask us about eligibility.

Warranty claims are made through the place of purchase, which is us. Victron's warranty doesn't cover physical damage or alteration, misuse (reversed polarity, poor or loose connections, liquid or condensation, lightning), improper installation, repairs by anyone other than Victron or an authorized repair centre, or the cost of removal, shipping and reinstallation. Full terms in Victron's warranty policy below.

πŸ“‹ Full Specifications

Charger
Model / Part Number Phoenix Smart IP43 Charger 12/30 (3) 120-240V / PSC123053095 (Victron now calls it the Smart IP43 Charger)
Battery Voltage 12V
Charge Current 30 A total, shared across 3 isolated outputs (each can deliver full current)
Low-Current Mode 15 A (50%; adjustable down to 25% in VictronConnect)
Charge Algorithm 6-stage adaptive: bulk, absorption, recondition, float, storage, refresh (3-stage for Li-ion)
Recommended Battery Bank Lithium 60–300 Ah; lead-acid 120–300 Ah (per Victron's manual)
Temperature Compensation -16.2 mV/Β°C (lead-acid presets; off in Li-ion mode)
Battery Temperature Sensing Via VE.Smart (Smart Battery Sense, SmartShunt or BMV); internal sensor used as a fallback
AC Input
Input Voltage 120–240 VAC nominal (85–250 VAC range; full power from 100 VAC); also 90–375 VDC
Frequency / Power Factor 45–65 Hz / above 0.99
Rated Input Power 470 W (per Victron's safety test certificate)
Max Efficiency 93% (95% at 230V)
No-Load Power 1 W; battery drain under 1 mA when AC is off
AC Connection IEC 320 C14 inlet with retainer clip; NEMA 5-15P cord sold separately
Connections & Control
Bluetooth Built in: VictronConnect app, Instant Readout
Ports VE.Direct, 2-pole remote on/off, programmable relay
Programmable Relay SPDT, 5 A up to 250 VAC / 5 A up to 28 VDC
VE.Smart Networking Yes: voltage, current and temperature sense; synchronized charging with up to 10 chargers
Battery Terminals Screw terminals, up to 16 mmΒ² (6 AWG), 2.4 Nm
Enclosure & Certifications
Protection Reverse polarity (internal fuse, not user replaceable), output short circuit, over-temperature
Protection Category IP43
Operating Temperature -20 to +60Β°C; full output up to 40Β°C, derating above (to 20% at 60Β°C per the datasheet, 25% per the manual)
Humidity Max 95%, non-condensing
Cooling Fanless (silent operation)
Enclosure Aluminium, blue (RAL 5012)
Weight 2.7 kg (6 lb) per the datasheet
Dimensions (H Γ— W Γ— D) 180 Γ— 249 Γ— 116 mm (7.1 Γ— 9.8 Γ— 4.6 in) per the datasheet; Victron's drawing shows about 100 mm deep
Certifications EN-IEC 60335-1, EN-IEC 60335-2-29 (Kiwa test certificate); Victron doesn't list UL or CSA
Warranty 5-year Victron limited warranty

πŸ“„ Manuals & Downloads

🌐Victron Product PageSmart IP43 Charger (formerly Phoenix)VICTRON β†— πŸ“„DatasheetSmart IP43 Charger 120-240V (PDF)PDF β†— πŸ“˜Owner's ManualSmart IP43 Charger 120-240V (PDF)PDF β†— πŸ“ŠOnline ManualSmart IP43 Charger 120-240V, full technical specsVICTRON β†— πŸ“Dimension DrawingSmart IP43 Charger (3) 120-240V (PDF)PDF β†— βœ…Safety Test CertificateEN-IEC 60335-1/-2-29 (PDF)PDF β†— πŸ“œVictron Limited WarrantyFull warranty policy (PDF)PDF β†—

Victron's box contents: the charger and an AC cord retainer clip. Manuals, drawings and certificates above link straight to Victron.

❓ Common Questions

Does it come with a power cord?
No. The charger has an IEC C14 inlet and Victron sells the cord separately: ADA010100400 (NEMA 5-15P) for standard 120V outlets, or ADA010100500 (NEMA 6-15P) for 240V. A retainer clip is included.
Can it charge lithium (LiFePO4) batteries?
Yes. Choose the Li-ion preset (14.2 V absorption, 13.5 V storage, no float). Victron advises against charging lithium below 0Β°C; add a Smart Battery Sense or SmartShunt so the charger knows the battery temperature.
How do the three outputs work?
All three outputs are isolated, so batteries stay separated. Each can deliver the full 30 A, but the combined current never exceeds 30 A. They share one charge profile, so the banks should be the same battery type.
Can I leave it connected all the time?
Yes. After charging it drops to float, then storage mode, and runs a short refresh absorption once a week to keep batteries healthy during long storage.
Is it waterproof?
It's rated IP43, which resists splashing water. Mount it somewhere sheltered, away from open decks and direct rain. For fully exposed locations, look at a Victron IP65 charger.
Is it UL listed?
Victron doesn't list UL or CSA certification for the Smart IP43. It's tested to EN-IEC 60335 safety standards (certificate linked above). If you need a UL-listed charger, call us and we'll suggest an option.
Does it work with a Victron GX device or battery monitor?
Yes. Connect it to a Cerbo GX with a VE.Direct cable for VRM monitoring, and use VE.Smart Networking with a SmartShunt, BMV or Smart Battery Sense for accurate voltage, current and temperature.
How does the warranty work?
Victron covers it for 5 years from the original end user's purchase date. Warranty claims go through the place of purchase, so contact us and we'll handle it with Victron.

Questions About Your Setup? Ask Us First.

Tell us your battery type, bank size and how many banks you need to charge, and we'll confirm the right Phoenix Smart IP43 charger before you order.

πŸ“ž Call 833-664-7433 πŸ“§ Email Us